Follow this video and you to can change your fluid and filter in your Jeep Liberty transmission for year model 2002-2007. It is very messy, but pretty simple if you take your time and it can save you a lot of money. Use ONLY ATF+4 full synthetic transmission fluid. Any other type fluid or any combination of friction modifiers will not provide the lubrication these transmissions need and you will quickly destroy them. NOTE: Sometimes when using a gasket for the pan, it leaks and is hard to stop. I recommend instead to use the sealant only with NO gasket. Tighten pan to transmission hand tight until the pan closes flat against the body. I ran into this problem after the video was already made. I took the pan back off and used sealant only laying down a 1/4 bead all around pan and bolt holes. I let dry for 4 hours, then filled with fluid.















Related Articles
No user responded in this post